Industrial Woven Wire Cloth with Plain Weave or Twilled Weave

Industrial woven wire cloth is manufactured with square apertures in plain or twilled weave. Following form listed several aperture figures and detail test methods.

Industrial woven wire cloth is manufactured with square apertures in plain or twilled weave.
IWWC-01: Types of industrial woven wire cloth weave.
The figures of aperture width, wire diameter and pitch are showed in the picture.
IWWC-02: Aperture width, wire diameter, and pitch.
The wire diameter may be determined after weaving by measuring wires which have been loosened from the woven wire cloth.
IWWC-03: Method for measuring wire diameter.
The width is measured by ruler, span of ten pitches shall be measured to the nearest millimetre, width shall be divided by ten to give the average pitch, then reduce wire diameter to get average width.
IWWC-04: Measured row with 10 pitches of 47.5 mm length.
The number of wires visible under low-powered magnification over a known distance (counting glass) may be counted, the average aperture width may be calculated by deducting the wire diameter from the average pitch.
IWWC-05: Counting glass for measuring aperture widths less than 1 mm.

Inquiry for Our Product

Shandong Xingying Environmental Energy Technology Co. LTD
E-mail: sales@goldoxwiremesh.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Full Name *
Country Code * + Phone Number *
Your Website
Message *